Led Behaviors - Schumacher EV Series Manual

EN - English
OPERATING INSTRUCTIONS
1. Check to make sure the wall charger's Power LED is illuminated a
steady, solid green color.
2. Remove charging gun from the wall charger's dock.
3. Connect the charging gun to your vehicle's charging port.
Note: The charging gun is fitted with a Type 2 connector that will fit
most electric vehicles.
4. Charging begins automatically. Your electric vehicle will control the
charging progress.
5. When charging has stopped, remove the charging gun from your
vehicle's charging port and return it to the wall charger's dock.The
charging session may be stopped manually by pressing the Off
button on the right side of the charger.
6. Make sure the output cable is neatly stored in the cable cradle.
7. To monitor your EV charging status or track your vehicle's charging
history, use the wall charger's Wi-Fi connection and the SchuPower
app. Simply download the SchuPower
instructions.
8. Warning: Do not tamper with the charger or its components.

LED BEHAVIORS

• Power LED (green) solid: Power is connected to the wall charger.
• Charging Gun LED (green) fade in/out: Charging is in progress.
• Charging Gun LED (green) solid: Connected to vehicle. The charging
process is complete, paused, or in scheduled charging mode.
• Charging Status LED (blue) solid: The wall charger is powered on and
in standby mode.
• Charging Status LED (green) fade in/out: Charging is in progress.
• Charging Status LED (cyan) flashing: The charging process is
complete or in scheduled charging mode.
• Charging Status LED (red) flashing: Error. Refer to the
troubleshooting guide for guidance.
• Wi-Fi LED (blue) solid: The wall charger is connected to the saved
Wi-Fi network.
• Wi-Fi LED (blue) flashing: The wall charger's Wi-Fi connection needs
to be configured. This can be completed through the SchuPower
• Wi-Fi LED (blue) off: The wall charger cannot connect to the saved
Wi-Fi network.
app and follow the app's
TM
- 16 -
TM
app.
TM