Daikin MC80ZBFVM Operational Manual page 23

2
Press to change the setting*
Each press cycles between Normal and Low.
Normal
„ Streamer operation condition
FAN/MODE setting
Turbo
FAN Standard
Quiet, Low
AUTO FAN,
ANTI-POLLEN,
MODE
CIRCULATOR
ECONO
* The Streamer operation status ON-OFF means that
the Streamer turns ON and OFF automatically
depending on the degree of air impurity and FAN
setting.
About the Streamer lamp
When the setting condition of Streamer is
ON–OFF or ON, it is always lit up. (However, it
is unlit during Monitoring mode).
It is unlit when the setting condition of Streamer
is OFF.
* If the lamps do not change even after the settings were changed, unplug the unit, wait at least 5 seconds, then re-insert the power supply plug
and repeat the above procedure from the beginning.
Press
A short beep sounds with the
ANTI-POLLEN MODE lamp
blinking while the FAN lamp
blinks according to the new
setting.
Low
Streamer output setting
Normal Low
ON
ON-OFF*
ON-OFF* OFF
ON-OFF*
ON-OFF* OFF
3
Blinking
Normal Low
Advanced Settings
4
While the lamp is blinking,
unplug the power supply plug,
wait at least 5 seconds, and
then insert the power supply
plug again.
Setting is now complete.
Power supply plug
Power
socket
• If this procedure is not
performed, the unit will not
return to the regular operation
mode.
• Settings are remembered even
if the unit is unplugged.
22