Table of Contents
Advertisement
2. Safety
2.4
Fire prevention
2.4.1 Fire due to fuel, oil
•
Avoid approaching any flame to flammable substances
such as fuel and oil.
•
Do not smoke or use open flames near flammable sub-
stances.
•
Stop the machine before refuelling.
•
Make sure not to spill flammable substances on over-
heated surfaces or on parts of the electrical system.
•
After refuelling, remove any spills and tighten all filling
caps tightly.
•
For safety in the workplace, store the cloths soaked in
flammable materials in a container.
•
Store oil and fuel in pre-established and well-ventilated
locations and prohibit the entry of unauthorised person-
nel.
•
When cleaning the machine, do not use flammable sub-
stances such as diesel or gasoline.
2.4.2 Fires caused by flammable material build-up
•
Remove dry leaves, chips, pieces of paper, carbon dust, or other flammable materials accumulated from
the machine.
2.4.3 Fire caused by electrical wiring
•
Always keep the electrical wiring clean and tightened.
•
Periodically check that there are no loose or damaged parts. Tighten loose wiring connectors or termi-
nals.
•
Repair or replace any damaged cables.
2.4.4 Fire caused by piping
•
Periodically check that the hose clamps are firmly fixed.
•
If loosened, they may vibrate during machine operation and cause leakage of liquids, provoking fires and
serious injuries, including fatalities.
2.5
Lifting and transport precautions
2.5.1 Lifting and manual transport
•
Handle the machine with the special handle.
•
Handle the machine with the engine off, the electrical cables disconnected and the fuel tank empty.
2.6
Precautions for positioning the machine
2.6.1 Positioning site precautions
•
The machine may not be used indoors, such as in homes and garages, even if the doors and windows
are open.
This machine has been designed for outdoor use and can therefore be positioned outdoors.
In case of meteorological precipitation (rain, snow, etc.), place the machine in an adequately sheltered
place. If this is not possible, do not use the machine.
•
Do not place machines or equipment near heat sources, in areas at risk with explosion hazard or fire
D5260090
9
Advertisement
Table of Contents
