Table of Contents
Advertisement
EN 8
4.
LC4.1E AA
4.4
TV & Scaler Board Removal
Figure 4-5 TV & Scaler board removal
1. Disconnect all cables from the TV & Scaler board.
2. Remove the screw from the grounding cable (1).
3. Remove the mounting screw (2) and remove the board.
4.5
Side I/O Panel Removal
2
Figure 4-6 Side I/O panel removal
1. Disconnect all cables from the Side I/O panel.
2. Remove the mounting screw (1).
3. Unlock the panel by twisting back the clamp at the bottom
(2).
4. Take out the Side I/O panel from the bracket.
4.6
Top Control Panel Removal
1. Disconnect the cable from the top control panel.
2. Remove the two mounting screws from the top control
panel.
3. Take out the top control panel.
Mechanical Instructions
1
2
E_14520_037.eps
160904
1
E_14520_038.eps
160904
4.7
Audio Amplifier Panel Removal
2
Figure 4-7 Audio amplifier panel removal
1. Disconnect all cables from the audio amplifier panel.
2. Remove all mounting screws from the audio amplifier panel
(1).
3. Unlock the panel by twisting back the clamp at the bottom
(2).
4. Take out the audio amplifier panel.
4.8
Exchanging the LCD Panel
Figure 4-8 Exchanging the LCD panel
1. Disconnect all cables from the LCD Panel.
2. Remove all mounting screws (1) from the metal cover.
3. Lift and take off the metal cover.
4. Now you can exchange the LCD panel.
4.9
Re-Assembly
To re-assemble the whole set, do all processes in reverse
order.
Notes:
Do not forget to replace the ground cable of the TV & Scaler
board, while mounting the screw at the board topside. See
figure "TV & Scaler board removal".
1
E_14520_039.eps
160904
1
E_14520_040.eps
160904
Advertisement
Table of Contents
