Canon High Capacity Stacker-H1 Operation Manual page 27

302 mm / 11.9"
80%
Example 5 - Two jobs exceed the maximum stack height
Assumption
In the Settings Editor, the [Maximum stack height] setting is set to 302 mm (11.9").
In the Settings Editor, the [Minimum filling level] setting is set to 80%.
On the printer operator panel, the workflow profile setting [Next output tray] is set to [When tray
is full].
2 different jobs with a stack height > 302 mm (11.9") each.
1 copy required
What happens?
Job 1 is stacked until a height of 302 mm (11.9") is reached. Then the stack with the partial job 1 is
ejected. The rest of job 1 is deposited on the stack tray. After you empty the stacker, job 2 will be
deposited the same way. Job 2 will not be deposited on top of job 1. The keep-jobs-together
function prevails.
302 mm / 11.9"
80%
Related information
Set the maximum stack height on page 23
Set the minimum filling level on page 24
Canon High Capacity Stacker-H1
Examples of using the [Maximum stack height] and the [Minimum filling level] settings
302 mm / 11.9"
80%
302 mm / 11.9"
80%
80%
302 mm / 11.9" 302 mm / 11.9"
80%
Chapter 4 - Use the stacker 27