Table of Contents
Advertisement
Set-up/Basic settings
To adjust the volume in Set-up,
Activate the Set-up menu,
Select the menu item VOLUME SETUP ,
Use
/
on the rocker switch to select the menu item you want to adjust
and
Press OK 8 or << >> on the rocker switch 7.
The menu item selected will appear in a frame. Now you can adjust the setting.
Use << >> on the rocker switch 7 to adjust the setting.
To help you select the right setting, the volume will increase and decrease as
you make the setting.
Press OK 8.
If you press ESC 9 to exit the menu, the setting will not change and the menu
will close.
Programming the hotkey
The hotkey 4 is the upper softkey on the left-hand side of the display. The
hotkey is a special feature you can use to adapt the TravelPilot to your own
personal requirements. You can select the function of the hotkey from a list of
nine possible functions:
•
TA-function
Route guidance
•
Route options
•
Last 10
•
•
Dest. memory
•
Position mark
•
GPS status
•
Time info
•
Locating mode
Set-up menu Volume
Set-up menu
76
Advertisement
Table of Contents
