Set-up/Basic settings
The setup function allows you to customise the TravelPilot's basic functions to
suit your needs.
The following functions can be changed:
•
Display - change the display properties
•
Volume - set the basic volume levels
•
Hotkey - program the hotkey
•
Time - set the clock
Language - load a language
•
•
Installation - test and calibration menu
•
Security - activate/deactivate the unit's security code
•
Reset - reset the unit to the default settings
•
Fmseek Best/Sens - Set the unit's search sensitivity
Activating the Set-up menu
If you are currently using a main or function menu,
Press DSC ; twice.
The system will switch to the Set-up menu.
If the DSC menu for an audio source or navigation is active,
Press DSC ; once,
or
Press the softkey marked SETUP .
The system will switch to the Set-up menu. The selection bar will mark the first
entry on the list menu.
To alter settings and activate menu items,
on the rocker switch 7 to move the selection bar.
Use
/
Press OK 8.
ENGLISH
SVENSKA
Set-up menu, Page 1
Set-up menu, Page 2
DANSK
73