Table of Contents
Advertisement
4 Operating the appliance
4
Operating the appliance
4.1
Basic procedure
▪ Use the navigation arrows
and to navigate through the operating steps.
▪ The selected set values are displayed for 5 seconds when the door is opened, and
then the actual temperature values are displayed.
▪ Touch a function button
Touch the active function button again or after 30 seconds without any interaction and
the setting is cancelled. The changed values are not accepted.
▪ Use the
button at any time to cancel and discard a change to an existing setting
and without the value of the operating step being accepted.
▪ Closing the refrigerator compartment door similarly cancels an active setting. The
changed values are not accepted.
▪ If a button that is inactive in the context menu is touched, a 2× acoustic signal is emit-
ted and «- -» is shown on the left- and right-hand side of the display.
▪ The
SilentPlus mode (noise-reduced operation) is temporarily interrupted for the
duration of the
ing/fast freezing.
4.2
Switching the appliance on
▸ Plug in the appliance at the mains socket.
– «OF» appears on the left- and right-hand side of the display for 30 seconds.
▸ Hold the
button depressed for 3 seconds.
– The appliance is switched on.
A newly installed appliance takes around 10 hours (empty state / without any food
inside) to reach its normal operating temperatures. The corresponding zones
continue to flash in the display until the temperatures are reached.
4.3
Setting the temperature
The required temperature for each zone is entered one after the other. Setting range:
– Refrigerator compartment: 3 °C to 9 °C (38 °F to 48 °F).
– Freezer compartment: -22 °C to -14 °C (-7 °F to 6 °F).
Procedure
▸ Touch the
,
– The temperature display for the refrigerator compartment flashes on the left-hand
side of the display.
▸ Touch the
or
compartment.
▸ Confirm with the
– The temperature display for the freezer compartment flashes on the right-hand side
of the display.
– Touch the
partment.
10
(up/left) and
/
/
PartyCooling mode (increased cooling capacity) and
or
button.
button and select the desired temperature for the refrigerator
button to accept the entry.
or
button and select the desired temperature for the freezer com-
(down/right) to select a settable value
/
to open the corresponding settings level.
Fast cool-
Advertisement
Table of Contents
