®
R&S
SMCVB-K160
1 Welcome to the DRM option
The R&S SMCVB-K160 is a firmware application that adds functionality to generate
signals in accordance with the DRM digital standard.
The R&S SMCVB-K160 option features:
●
DRM signal generation
This user manual contains a description of the functionality that the application pro-
vides, including remote control operation.
All functions not discussed in this manual are the same as in the base unit and are
described in the R&S SMCV100B user manual. The latest version is available at:
www.rohde-schwarz.com/manual/SMCV100B
Installation
You can find detailed installation instructions in the delivery of the option or in the
R&S SMCV100B service manual.
1.1 Accessing the DRM dialog
To open the dialog with DRM settings
► In the block diagram of the R&S SMCV100B, select "Baseband > DRM".
A dialog box opens that displays the provided general settings.
The signal generation is not started immediately. To start signal generation with the
default settings, select "State > On".
1.2 What's new
This manual describes firmware version FW 5.20.043.xx and later of the
R&S
Compared to the previous version, it provides information on how to load and play
DRM stream library files. See
on page 18.
1.3 Documentation overview
This section provides an overview of the R&S SMCV100B user documentation. Unless
specified otherwise, you find the documents at:
User Manual 1179.1070.02 ─ 05
®
SMCV100B.
"To load and play a DRM stream library file"
Welcome to the DRM option
Documentation overview
5