Table of Contents
Advertisement
Safety
DANGER
WARNING
CAUTION
NOTICE
Page 6
The LAS 260.1 has been built in accordance with the state of
the art and is safe to operate. Nonetheless, the device can still
present potential hazards if it is used by untrained personnel
improperly or for purposes for which it is not designed.
During the development and manufacture of the LAS 260.1,
every step has been taken to ensure compliance with the safety
requirements of the directives and standards listed in the EU
Declaration of Conformity.
The information provided in this manual should never be given
a higher priority than the individual responsibility of persons
working on/with the machine and/or the local regulations that
apply.
During operation and during all other work on the LAS 260.1,
the operating company is responsible for the following in all
cases:
-
Safety of all persons involved;
-
Safety of the device and all other parts of the equipment;
-
Environmental protection.
Symbols
In this manual, all descriptions of actions to be carried out are
supplemented with the necessary safety instructions.
Safety instructions will warn you about:
-
Residual hazards that can occur unexpectedly.
-
Residual hazards that can lead to serious injuries.
Indicates a hazardous situation with high risk that, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation with moderate risk that, if not
avoided, could result in death or serious injury.
Indicates a hazardous situation with low risk that, if not avoided,
could result in minor or moderate injury.
Indicates the risk of potential material damage without personal
injury.
Safety
LAS 260.1 – Date 07/2023
Advertisement
Table of Contents
