Table of Contents
Advertisement
Status orange
NOTICE
NOTICE
LAS 260.1 – Date 07/2023
Flashing:
This status is only output in the operating mode ecoflow CS
The set suction power is not currently being attained by the
unit.
The device is running outside of the unit specifications.
•
Connect the suction section.
•
Reduce the diameter of the suction section.
•
Switch the control mode from high-pressure
operation to medium-pressure operation.
•
Check the suction power and slowly reduce it if
required via the potentiometer until the status
changes to green.
Continuously on:
Particulate filters are heavily saturated. The particulate filters
need to be replaced soon.
Get new filters ready for replacement.
LED status messages
Warning
®
.
Page 39
Advertisement
Table of Contents
