Device variant and
application
Application LAS
LAS 260.1 – Date 07/2023
The LAS 260.1 is used for extraction and filtration of dry and
non-combustible dusts in air mixtures that are not potentially
explosive and are produced during laser machining processes.
Areas of application:
-
Laser cutting
-
Laser engraving
-
Laser structuring
-
Laser sintering
The LAS 260.1 is to be used on laser workstations or laser
machining stations in such a way that the hazardous
substances that arise are extracted directly at the point where
they are generated.
Filter FK
Pre-filter: Particulate filter cassette F9
-
-
Main filter: Combined filter cassette H14A10
-
-
Thanks to their depth effect, the pre-filters are particularly well
suited to the separation of laser smoke. A large part of the
particles in the laser smoke is adsorbed. Finest suspended
solids are retained by the HEPA H14 filter of the combined filter
cassette H14A10. This guarantees a particle separation rate of
99.995%. The activated carbon layer is used for filtration of
gases, vapors, and odors.
Device variant and application
Raw gas intake
Pleated filter F9
Filter class ISO ePM1 80% in acc. with ISO 16890
Pleated filter H14
Filter class HEPA H14 in acc. with EN 1822
Adsorption filter, activated carbon, 10 kg
Page 19