Tables - IBM 2073-700 Quick Installation Manual

Tables

1. How to connect SAS cables to expansion units. 25
2. Ethernet connections available with the control
enclosure . . .
3. Ethernet connections available with the file
modules . . .
4. How to connect Fibre Channel cables from file
modules to the controller. Refer to the graphic
below. . . . .
5. LED status front of control enclosure. Refers to
item [1] in the figures above. .
6. LED status rear of control enclosure. .
7. LED status when control enclosure is powered
on. . . . . .
8. This table (optional) is useful for identifying
the IP addresses and information necessary to
set up the initialization tool. The table entries
serve as a guide only. Fill in the Value column
with your system information. .
© Copyright IBM Corp. 2011
. . . . . . . . .
. . . . . . . . .
. . . . . . . . .
. . . . .
. .
. . . . . . . . .
. . . .
9. Create two files and enter one line each,
adjusted to the values fitting to your
. 30 environment. .
10. This table (optional) is useful for completing
. 31 the Easy Setup wizard. The table entries serve
as a guide only. Enter the Value column with
your system information. .
. 33 11. Remote support information .
12. CIDR subnet mask information .
. 36 13. Authentication method information
. 37 14.
Active Directory Configuration Information
15. LDAP CONFIGURATION INFORMATION
. 38 16. NIS configuration information .
. 41
. . . . . . . . .
. . . . .
. . . .
. . .
. .
. . .
. . 44
. . 46
. . 48
. . 49
. . 50
50
52
. . 53
vii