Sony MEMORY STICK HDC-950 Operation Manual page 82

2-2 Controls and Connectors
Back (Right)
1 Memory stick section
2 POWER switch
1 Memory stick section
A slot to accomodate a memory stick and an eject
button to remove the stick are provided behind the
panel. The eject button lights in red while writing or
reading data to/from a memory stick.
Note
Do not insert/remove the memory stick when the eject
button lights.
For memory stick operations, refer to the System Manual,
and see "4-6-9 Using Operator Files" on page 4-22(E).
2 POWER switch
CCU: Power supply will be received from the
camera control unit.
EXT: Power supply will be received through the DC
IN or VTR connector.
2-8(E)
Chapter 2 Locations and Functions of Parts
Shoulder strap fitting (see page 2-1(E))
3 RET 1 button
4 RET button and select
5 INCOM1/2 controls and
6 CALL button
3 RET 1 (return video 1) button
The return video 1 signal from the camera control unit
is monitored on the viewfinder screen while this button
is pressed.
4 RET (return video) button and select switch
When other return video systems are used in addition
to return video 1, you can monitor the signal (return
video 2, 3, or 4) selected using the selector on the
viewfinder screen while pressing the button.
Note
The RET 1 button has priority over the RET button if
both buttons are pressed.
5 INCOM1 and 2 controls and switches
There are a PGM control incorporated with a select
switch, a line select switch, a LEVEL/TALK switch,
and INCOM control each for intercom lines 1 and 2.
switch
switches