Table of Contents
Advertisement
Equinox Capricorn Laser
Operation modes
Operation modes:
The Capricorn has three modes of operation as follows:
1, Sound active mode
To select sound active mode set dipswitch 10 to ON and all others to OFF. You can now use
the sensitivity control on the back panel to set the required sound level. After 8 - 10 seconds
without any music, the laser diodes will turn OFF and will come back ON as soon as the music
starts again.
2, Auto mode
To select auto mode, set dipswitches 9 + 10 to the ON position and all others to OFF. The
Capricorn will now display all it's internal programmes consisting of colour change, rotation
change, pattern change and position change. In this mode the laser diodes will remain on
constantly until the power is turned OFF or the mode is changed.
3, DMX mode
To select DMX mode, set dipswitch 10 to OFF. You can now set the required DMX address using
dipswitches 1 to 9. Please refer to the chart below for DMX functions.
DMX function chart:
Advertisement
Table of Contents
