INSTALLATION OF SEDIMENT TRAP AND BURNER SUPPLY
IMPORTANT:
Gas piping should be installed according to local authorities or CAN/CGA B149.1 & .2 or UL 296.
PRESSURE TEST-OVER
The appliance and its individual shutoff valve must be disconnected from the gas supply piping system during any
pressure testing of the system at a test pressure in excess of
1
PRESSURE TEST-
/
PSIG OR LESS
2
The appliance must be isolated from the gas supply piping system by closing its individual manual shutoff valve
during any testing of the gas supply piping system at test pressures equal to or less than
20027974
1
/
PSIG.
2
1
/
PSIG.
2
NOT SUPPLIED
S8141
GB
1
/
PSIG.
2
1"
8