Each Setting And Adjustment; Necessary Items To Be Noted; Updating Of The Firmware - Pioneer DDJ-SR Service Manual

5

8. EACH SETTING AND ADJUSTMENT

8.1 NECESSARY ITEMS TO BE NOTED

After repairing, be sure to check the version of the firmware, and if it is not the latest one, update to the latest version.
Perform the each item when the following parts are replaced.
• IC storing firmware
IC20 (I/O PCB Assy)
• IC storing utility settings
IC19 (I/O PCB Assy)
• PCB Assy storing firmware and utility settings
I/O PCB Assy
• Wheel Assy

8.2 UPDATING OF THE FIRMWARE

Preparations
• Unzip the downloaded update fife for updating.
Place the update file on the desktop.
• ASIO driver exclusively for DDJ-SX is required to be installed for Windows PC users.
• If Java has not been installed, please download the Java Runtime Environment (JRE) at: http://java.com and install
it on your computer.
Updating Procedures
Note: Turn the power off and disconnect all the cables from the unit.
And close all applications on your computer before running this updating procedure.
1 Connect your computer to DDJ-SR via the USB cable
included with the product.
2 Turn on the power of DDJ-SX while pressing the [SHIFT]
button and the [SYNC] button on the LEFT deck ensure
the Level meter LEDs flash before releasing your finger
from the these buttons.
PC
5
6
USB cable
6
7
• Confirmation of the version of the firmware
• Updating to the latest version of the firmware
• Factory reset
• Be changed user setting to condition before the repair
(when be possible)
• Confirmation of the version of the firmware
• Updating to the latest version of the firmware
• Factory reset
• Be changed user setting to condition before the repair
(when be possible)
• Confirmation of the specified value by the mode which
measures rotary decline time of the jog dial
3 When the update file for DDJ-SR (DDJ-SR_Vxxx.jar) is
activated, the following dialogue is displayed. Click the
[Start] button.
Approximately a few minutes are required for updating.
4 When the firmware update process is complete, click the
[OK] button.
Note: Please note that if you fail to update, turn on the
power of DDJ-SR again and start from Step 2 of the
above Updating Procedures.
DDJ-SR
7
8
A
B
C
D
E
F
33
8