Pioneer DDJ-SR Service Manual page 22

1
3. Factory Reset
A
The following data is reset to the factory default settings by "Factory reset" operation.
• Setting data in Utility mode
• Last memory of users
[Method to reset]
Press and hold the left DECK "SYNC" button and the right DECK "SYNC" button.
Then factory reset starts and "SYNC"LEDs are lit.
After completing reset, "SYNC" LEDs are turned off.
B
C
[3] Measurement mode
This is the mode to measure jog dial rotation time and the fluctuation of knobs/faders.
(1) Jog dial Rotation Time measurement mode
D
(2) Volume value fluctuation check mode
into
Measurement mode
E
[Method to enter]
Press and hold the "SHIFT"+"DECK3" buttons then Power-ON.
During this mode, "DECK 3" and "DECK 4" LEDs are lit.
[Method to exit]
F
Power-OFF
22
1
2
Volume value fluctuation check mode
Jog dial Rotation Time measurement mode
DDJ-SR
2
3
3
4
4