Advertisement
PLACEMENT CONSIDERATIONS
Installing Outdoor Units Indoors
Provide a means to drain the condensate generated during heating mode and defrost cycle in addition to rainwater that infiltrates the inlet
louver enclosed area.
• Install a field-provided drain pan under the outdoor units and provide a path to a nearby floor drain.
• If the ambient air temperature is expected to drop below 32°F in the enclosure, heat the bottom surface of the pan, drain line, and floor
drain so that the condensate does not freeze before reaching the drain.
CAUTION
Allow for ventilation intake and exhaust air based on maximum outdoor unit fan capacity.
• Select the size, type and orientation of architectural louvers with adequate "net free area" face velocity to ensure the total external static
pressure from the outdoor unit fan does not exceed design limitations (see specification data tables).
• No obstructions must be placed in front of the louver that could hamper the free flow (throw) of air.
• Roof top openings and / or discharge and supply louvers must be equipped with screens to prevent bird and insect infiltration.
As always, the best solution for each project balances acceptable heating performance (considering local weather conditions), capital costs,
life cycle energy consumption, and limitations set forth by local building codes.
Louver Recommendations for Outdoor Unit Enclosure
1. Outdoor Unit Enclosure: Manual Door Open Type.
2. Louver Angle: No More Than 15° Horizontally.
3. Space Between Louvers: More than 4 inches (Recommend).
4. Louver Shape: Wing or Plane Type.
•
•
If the Louver Open Rate is Too Small
1.
2.
3.
4.
76 | APPLICATION
-
©
Figure 51: Louver Recommendations.
Maximum 15°
(Recommended)
More than 4 in.
(Recommended)
Louver
Figure 52: Using "S" Type Louvers.
Air flow passing through
the louver blade backwards
can generate noise.
-
Outside
side
In
Inside
Advertisement
