SEAT IBIZA FACELIFT Montage: Installation: Bereid de bekabeling en aansluitin- Prepare the ZENEC device for the gen van het ZENEC apparaat voor, installation before you start dis- voordat het originele gedemonteerd mounting the factory installed OE wordt. Verbind de hoofdaansluitka- radio.
Page 3
3mm. Plaats het ZENEC apparaat ter of 3 mm. Insert the ZENEC device volledig in het inbouwgat. Dit apparaat completely into the mounting slot. heeft vier schroefgaten aan de zijkan- The device has four mounting holes ten zitten.
Page 4
Verleg nu de aansluitkabels naar bene- Route the various connection cables den in het radiogat. Doe dit voorzichtig of the ZENEC device in the lower area zodat deze niet beschadigen. Plaats nu of the assembly opening and take care het ZENEC apparaat in het inbouwgat.
Page 5
“setup” menu van de bluetooth functie aangepast te worden. ➜ Please check if all plug-and-socket connections on the rear of the Z-E5514M are properly seated before you insert ➜ Kijk voor de definitieve montage van de Z-E5514M na and fix the device in the console.
Page 6
SD card 8 GB Losse insteekconnector Montageschroeven Detachable cable Mounting screws T O U C H A N O T H E R W O R L D ZENEC by ACR AG Bohrturmweg 1 CH-5330 Bad Zurzach Schweiz/Switzerland E-Mail: support@zenec.com www.zenec.com ·...
Need help?
Do you have a question about the Z-E5514M and is the answer not in the manual?
Questions and answers