Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ZENEC Z-E2026
Summary of Contents for ZENEC Z-E2026
- Page 1 Z-E2026 DEVICE INSTALLATION MANUAL...
-
Page 2: Compatibility List
COMPATIBILITY LIST Model Model Version Model Year Model Model Version Model Year VW Polo 2010 – 2014 VW Amorak from 2010 VW EOS from 2006 VW Caddy 2K/2C 2003 – 2015 VW Scirocco III from 2008 VW Caddy from 2015 VW Beetle Coupé... -
Page 3: The Kit Includes
● The ZENEC system is equipped with an integrated DAB+ receiver. To make use of this you will need a suitable DAB antenna (not included in kit) that must be connected to the ZENEC system. Please pay attention that the device does not have a phantom power for the voltage supply of an active DAB antenna. - Page 4 3. Now you can start with the deinstallation of the original device. 4. Please switch on the ignition only, when all work steps are done and the ZENEC system is completely mounted. Gently lift the trim frame starting on the right side of OE device.
-
Page 5: Installation
Connect one of the main connection cables (No. 5 or No. 6) of the ZENEC system (No. 1) to the Quadlock connector of the car and close its locking mechanism. Please pay attention to the... - Page 6 (trees, high buildings etc.). Now insert the navigation software SD card (No. 2) supplied into the microSD card slot of the ZENEC system, and start it in order to establish a sat fix. Make sure that the vehicle is not moved until the sat fix is established. Now press the NAV button to start the navigation mode, and choose map view.
-
Page 7: Connection Diagram
EU Legal Representative: ACR S & V GmbH · Industriestr. 35 · D-79787 Lauchringen / Ger Loudspeaker rear left (-) Loudspeaker front left (-) * Internally connected *eingebaut miteinander verbunden ZENEC · Bohrturmweg 1 · CH-5330 Bad Zurzach · Schweiz/Switzerland · Mail: support@zenec.com · www.zenec.com...
Need help?
Do you have a question about the Z-E2026 and is the answer not in the manual?
Questions and answers