Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ZENEC Z-E3766
Summary of Contents for ZENEC Z-E3766
- Page 1 Z-E3766 INSTALLATION MANUAL...
-
Page 2: Compatibility List
ZENEC system. NOTE ● The target vehicle must offer factory provision for the installation of a radio. The ZENEC system is not compatible with vehicles that are equipped with an OE radio or OE navigation system ex works. -
Page 3: Installation
REMOVAL WORK AND PREPARATION: Remove both storage compartments in accordance with the manufacturer‘s information. 2.a Cut off the left and right plastic holders for the storage compartments as flush as possible. 2.b Use a suitable saw to do this, and then a file to remove any protrusions still present. - Page 4 4.b Screw down the mounting frame at the top and bottom with the four Phillips screws (No. 3) supplied with the ZENEC system kit. (No picture) Fit the GPS antenna (No. 6) at a suitable place,...
- Page 5 (trees, high buildings etc.). Now insert the navigation software SD card (No. 5) supplied into the SD card slot of the ZENEC system, and start it in order to establish a sat fix. Make sure that the vehicle is not moved until the sat fix is established. Now press the NAV button to start the navigation mode, and choose map view.
-
Page 6: Connection Diagram
Loudspeaker front left (+) Loudspeaker rear left (-) Loudspeaker rear left (-) Loudspeaker front left (-) Loudspeaker rear left (+) *300mA max. (reserved Schaudt) Input ZENEC · Bohrturmweg 1 · CH-5330 Bad Zurzach · Schweiz/Switzerland · Mail: support@zenec.com · www.zenec.com...
Need help?
Do you have a question about the Z-E3766 and is the answer not in the manual?
Questions and answers