Page 1
All manuals and user guides at all-guides.com OPERATION MANUAL CRDV 200 - 315 Pipe- / Roof plastic industrial fan Agent : For use in Ex zones Not for use in Ex zones Page 1 COLASIT AG TD-000 675-E Plastic construction...
Page 2
All manuals and user guides at all-guides.com Preface This operating manual is the driver's license for operation of this COLASIT fan. It is the main source of information and also the safety guideline. It deserves your full attention - please read it carefully.
Assembly instructions ........................... 17 17.1 Assembly instructions CRDV 200-315 ......................17 Spare parts lists ............................19 18.1 Spare parts list for CRDV 200-315 with direct drive ..................19 Part 3: Certification ..............................20 Certifications ..............................20 19.1 EU declaration of conformity ........................20 19.2 ATEX-Declaration of Conformity .........................
Definition The term "COLASIT fan" stands for a Swiss high-quality product and contains all the components and individual parts as specified in the purchase order or in the material parts list, which, when assembled, form a functional unit.
COLASIT only guarantees the durability of materials on condition that technological data was available before production. Any change in the conditions of use is only permissible after approval by COLASIT; otherwise this will entail loss of warranty. Any changes or repair work during the warranty period may only be made by our fitters or with our written consent.
Explosion protection COLASIT plastic fans are suitable for the conveyance of gases in Zone 1 or 2 (Equipment Category 2 or 3) depending on the model. COLASIT plastic fans are not suitable for the conveyance of gases in Zone 0 (Equipment Category 1).
The fitter must confirm the proper installation item for item on this form. The signed form must be kept by the safety officer or operating company. COLASIT also offers a comprehensive installation service for fans. Page 8 COLASIT AG...
Connection ducting on the pressure side must be routed to prevent the backflow of foreign bodies, rainwater or condensate into the fan. To ensure this, please use the COLASIT condensate drain nozzles. Due to the possibility of noise nuisance, we recommend that the fan should not be installed in the immediate vicinity of workplaces.
The motor electrical specifications are indicated on the motor’s rating plate or in the motor manufacturer’s data sheet. When speed is controlled by means of a frequency converter, the maximum speed is limited by COLASIT to the value indicated on the manufacturer’s rating plate.
If the intake and delivery ducts of the fan are dismounted for a longer period of time, the openings must be closed off. Page 11 COLASIT AG TD-000 675-E Plastic construction Edition 10/2019, Subject to alteration CH-3700 Spiez Copyright by COLASIT AG Spiez Phone +41 (0)33 655 61 61 Fax +41 (0)33 654 81 61...
Please address your spare parts order to our customer service department. Page 12 COLASIT AG TD-000 675-E Plastic construction Edition 10/2019, Subject to alteration CH-3700 Spiez Copyright by COLASIT AG Spiez Phone +41 (0)33 655 61 61 Fax +41 (0)33 654 81 61...
You will find important instructions on how to produce process instructions in various chapters of this operating manual. To help ensure the safe operation of the fan, COLASIT offers the service of reviewing process instructions prepared by the operator Logbook For your own safety and as an aid to personal responsibility, we recommend the keeping of a logbook for the entire period during which the fan is in service.
- Elastic sleeves - Condensate drains - Protective grating for intake-and outtake flap Fan identification The following rating plate is affixed to each COLASIT fan: Manufacturer Field for CE marking and applicable standards ATEX-identification, for details see the section on Explosion Protection Fan specifications: fan type, casing design, material of casing and impeller, order number and date of manufacture.
All manuals and user guides at all-guides.com Dimensional drawings 16.1 Dimensions of the CRDV 200-315 Ventilator Measurements Typ CRDV NWØ ØD 200R 250R 315R 1030 Page 15 COLASIT AG TD-000 675-E Plastic construction Edition 10/2019, Subject to alteration CH-3700 Spiez...
All manuals and user guides at all-guides.com 16.2 Dimensions of the CRDV 200-315 Ventilator Measurements Typ CRDV NWØ ØD 200D 250D 315D Page 16 COLASIT AG TD-000 675-E Plastic construction Edition 10/2019, Subject to alteration CH-3700 Spiez Copyright by COLASIT AG Spiez...
All manuals and user guides at all-guides.com Assembly instructions 17.1 Assembly instructions CRDV 200-315 Attach motor to the motor plate Mount impeller and V-ring seal Screw motor-plate, lower part of housing and intake together, adjust impeller (5mm minimum clearance to...
Page 18
Dismantle in the same way but in reverse order Page 18 COLASIT AG TD-000 675-E Plastic construction Edition 10/2019, Subject to alteration CH-3700 Spiez Copyright by COLASIT AG Spiez Phone +41 (0)33 655 61 61 Fax +41 (0)33 654 81 61...
All manuals and user guides at all-guides.com Spare parts lists 18.1 Spare parts list for CRDV 200-315 with direct drive Hood complete Clamp adapter set Bottom part Hub cap Motor plate 10 Clamp ring V-seal 11 Round gasket Impeller 12 Profiled seal...
Wehntalerstrasse 3 CH-8057 Zürich COLASIT hereby certifies compliance with the basic health and safety requirements for the design and manufacture of equipment and protection systems for use for their intended purpose in explosive atmospheres in compliance with Annex II of the Directive.
Page 22
Enclosure Declaration of Conformity No. TD-000 789 Description of appliance or protective system The pipe-/roof industrial plastic fan CRDV 200-315 with direct drive extract room air or process exhaust air. They are directly driven by electric motors. Special conditions If the fans are operated within explosive atmospheres...
Datasheet of the fan If ATEX version additionally: • ATEX Certification/Inspection report for fan (see 19.2) • ATEX Certification/Inspection report for electric motor (if this was supplied by COLASIT) Page 23 COLASIT AG TD-000 675-E Plastic construction Edition 10/2019, Subject to alteration...
Name of fitter: ........................... Place and date:..........................Signatur: ............................Page 24 COLASIT AG TD-000 675-E Plastic construction Edition 10/2019, Subject to alteration CH-3700 Spiez Copyright by COLASIT AG Spiez Phone +41 (0)33 655 61 61 Fax +41 (0)33 654 81 61...
Need help?
Do you have a question about the CRDV 200 and is the answer not in the manual?
Questions and answers