Page 1
For use in Ex zones Not for use in Ex zones Page 1 COLASIT AG TD-000 674-E Plastic construction Edition 4/2016, Subject to alteration CH-3700 Spiez Copyright by COLASIT AG Spiez Phone +41 (0)33 655 61 61 Fax +41 (0)33 654 81 61...
Page 2
Preface This operating manual is the driver's license for operation of this COLASIT fan. It is the main source of information and also the safety guideline. It deserves your full attention - please read it carefully. The contents of this operating manual are subject to change without notice in order to take technical progress into account.
Personnel qualifications ..........................5 Possible emergencies............................ 5 Safety officer (SO) ............................5 General risk matrix ............................6 EC conformity of the COLASIT fan ........................ 7 1.10 Restrictions when commissioning ......................... 7 1.11 General operation conditions ......................... 7 Explosion protection ............................8 Fan Ex marking ..............................
Definition The term "COLASIT fan" stands for a Swiss high-quality product and contains all the components and individual parts as specified in the purchase order or in the material parts list, which, when assembled, form a functional unit.
COLASIT only guarantees the durability of materials on condition that technological data was available before production. Any change in the conditions of use is only permissible after approval by COLASIT; otherwise this will entail loss of warranty. Any changes or repair work during the warranty period may only be made by our fitters or with our written consent.
Please always use original spare parts and contact the manufacturer in any case of doubt. Page 6 COLASIT AG TD-000 674-E Plastic construction Edition 4/2016, Subject to alteration CH-3700 Spiez Copyright by COLASIT AG Spiez Phone +41 (0)33 655 61 61 Fax +41 (0)33 654 81 61...
Explosion protection COLASIT plastic fans are suitable for the conveyance of gases in Zone 1 or 2 (Equipment Category 2 or 3) depending on the model. COLASIT plastic fans are not suitable for the conveyance of gases in Zone 0 (Equipment Category 1).
The signed form must be kept by the safety officer or operating company. COLASIT also offers a comprehensive installation service for fans. Shipping, unpacking, inspection, storage The fan is completely assembled and can be delivered in a closed film wrapping.
Connection ducting on the pressure side must be routed to prevent the backflow of foreign bodies, rainwater or condensate into the fan. To ensure this, please use the COLASIT condensate drain nozzles. Due to the possibility of noise nuisance, we recommend that the fan should not be installed in the immediate vicinity of workplaces.
The motor electrical specifications are indicated on the motor’s rating plate or in the motor manufacturer’s data sheet. When speed is controlled by means of a frequency converter, the maximum speed is limited by COLASIT to the value indicated on the manufacturer’s rating plate.
If the intake and delivery ducts of the fan are dismounted for a longer period of time, the openings must be closed off. Page 12 COLASIT AG TD-000 674-E Plastic construction Edition 4/2016, Subject to alteration CH-3700 Spiez Copyright by COLASIT AG Spiez Phone +41 (0)33 655 61 61 Fax +41 (0)33 654 81 61...
You will find important instructions on how to produce process instructions in various chapters of this operating manual. To help ensure the safe operation of the fan, COLASIT offers the service of reviewing process instructions prepared by the operator Page 14...
Restrictors not or only partly Check opening on site open Page 15 COLASIT AG TD-000 674-E Plastic construction Edition 4/2016, Subject to alteration CH-3700 Spiez Copyright by COLASIT AG Spiez Phone +41 (0)33 655 61 61 Fax +41 (0)33 654 81 61...
- Condensats drains - Motor cover for outdoor installation - Splinter protection Fan identification The following rating plate is affixed to each COLASIT fan: Manufacturer Field for CE marking and applicable standards ATEX-identification, for details see the section on Explosion Protection Fan specifications: fan type, casing design, material of casing and impeller, order number and date of manufacture.
Dimensions of the CMVeco 125 – 400 with direct drive 16.1 Page 17 COLASIT AG TD-000 674-E Plastic construction Edition 4/2016, Subject to alteration CH-3700 Spiez Copyright by COLASIT AG Spiez Phone +41 (0)33 655 61 61 Fax +41 (0)33 654 81 61...
Dismantling in the same way but in reverse order Page 19 COLASIT AG TD-000 674-E Plastic construction Edition 4/2016, Subject to alteration CH-3700 Spiez Copyright by COLASIT AG Spiez Phone +41 (0)33 655 61 61 Fax +41 (0)33 654 81 61...
3. Install V-belt drive. Tension drive belt 4. Attach casing to the support Page 20 COLASIT AG TD-000 674-E Plastic construction Edition 4/2016, Subject to alteration CH-3700 Spiez Copyright by COLASIT AG Spiez Phone +41 (0)33 655 61 61 Fax +41 (0)33 654 81 61...
Page 21
Dismantling in the same way but in reverse order Page 21 COLASIT AG TD-000 674-E Plastic construction Edition 4/2016, Subject to alteration CH-3700 Spiez Copyright by COLASIT AG Spiez Phone +41 (0)33 655 61 61 Fax +41 (0)33 654 81 61...
Impeller Clamp adapter set Hub cap Flange motor Page 22 COLASIT AG TD-000 674-E Plastic construction Edition 4/2016, Subject to alteration CH-3700 Spiez Copyright by COLASIT AG Spiez Phone +41 (0)33 655 61 61 Fax +41 (0)33 654 81 61...
Wehntalerstrasse 3 CH-8057 Zürich COLASIT hereby certifies compliance with the basic health and safety requirements for the design and manufacture of equipment and protection systems for use for their intended purpose in explosive atmospheres in compliance with Annex II of the Directive.
Page 26
This certificate may only be copied in full without any changes. Page 26 COLASIT AG TD-000 674-E Plastic construction Edition 4/2016, Subject to alteration CH-3700 Spiez Copyright by COLASIT AG Spiez Phone +41 (0)33 655 61 61 Fax +41 (0)33 654 81 61...
Further certificates This operating manual has the following certificates enclosed: Datasheet of the fan ATEX Certification/Inspection report for fan (see 19.2) ATEX Certification/Inspection report for electric motor (if this was supplied by COLASIT) Page 27 COLASIT AG TD-000 674-E Plastic construction...
Name of fitter: ........................... Place and date:..........................Signatur: ............................Page 28 COLASIT AG TD-000 674-E Plastic construction Edition 4/2016, Subject to alteration CH-3700 Spiez Copyright by COLASIT AG Spiez Phone +41 (0)33 655 61 61 Fax +41 (0)33 654 81 61...
Need help?
Do you have a question about the CMVeco Series and is the answer not in the manual?
Questions and answers