Red Arrow FLSMD50Y-1 Installation Instructions

Safety Warning
•
The installation should be carried out
by a qualified electrician in compliance
with the current edition of the IEE
Wiring Regulations.
•
Prior to installation, carry out the
necessary risk assessment considering
the people who could be at risk,
the level of risk and the precautions
required to control the risk
•
Ensure that the circuit supply is
isolated either by the circuit supply
fuse being removed or the applicable
Specification
Box Contents -
1 x LED SMD Yellow Floodlight
FLSMD50Y-1: L: 310 x W: 310 x D: 65mm
FLSMD100Y-1: L: 320 x W: 320 x D: 90mm
Dimensions:
FLSMD150Y-1: L: 365 x W: 370 x D: 94mm
FLSMD200Y-1: L: 425 x W: 410 x D: 110mm
Body: Die-Cast Aluminium
Material:
Lens: Tempered Glass
Colour
6500k
Temperature:
CRI: Ra70
LED Lifetime: 35,000 Hrs
Beam Angle:
120° Symmetrical
IP Rating: IP65
Ik Rating: IK07
Working
-20°C - 40°C
Temperature:
Power Factor: 0.9
Guarantee: 3 Years
3
50-
YRS 200
WATT
GUARANTEE
INSTALLATION INSTRUCTIONS
FLSMD Site Flood Multi-voltage
Product Codes: FLSMD50Y-1, FLSMD100Y-1, FLSMD150Y-1,
FLSMD200Y-1
IP65
6500K
circuit breaker being turned off before
installation or any maintenance.
•
Check the total load on the circuit
ensuring the luminaire does not exceed
the rating of the circuit cable, fuse or
circuit breaker.
•
Long-term use and voltage fluctuations
can reduce the life span of the fitting.
•
If the fitting incorporates control gear,
ensure careful sizing to avoid instances
of nuisance tripping of the protective
device used in the installation.
D mm
86-
LED
264V
•
Follow the provided installation
instructions, using the fixings supplied
or recommended.
•
Keep out of reach of children.
W mm
L mm
IK07