MALTEC PT3800Wt Instruction Manual page 18

temperatu On
re
Open
window
detectio
n
Light
flickerin
g
Open
window
detection
heating.
Press "+",
Set temperature is 1-2℃ higher than Environment temperature, Low
heating.
Set temperature is higher or equal to Environment temperature+3℃, High
heating.
2、Press OK, or after LED flickering 5s, set temperature mode is start up.
1、Open window detection only can be start up when appliance in
heating mode(can not start up when appliance is only fan working) or in
set temperature mode.
2、Press " ", Open window detection on, Open window detection off.
3、Temperature detection start up after 1 minute from Open window
detection start up.
Per 10 minutes(temperature slow down detection check point) as a round,
in one round, detect the temperature once every 5 minutes(temperature
fast down detection check point). Detail in the following table.
Time round Time
Min: s Min: s
00:00 - 01:00 0:00
01:00-11:00 1:00
6:00
Description
Open window detection start up
Temperature detection start up
Temperature detection starting
check point
Temperature detection check point 1
(temperature fast down detection check
point).
1、Temperature detection check
point 1 reduce from Temperature
detection starting check point
≤8 , the appliance keep
and Open window detection keep
working.
2、Temperature detection check
point 1 reduce from Temperature
detection starting check point >
8℃. The appliance stop heating
and stand by, Open window
detection stop.(See Remarks)
3、Temperature detection check
point 1（**℃） ≥ Temperature
detection starting check point, the
appliance keep heating and Open
window detection keep working
**℃: Maximum detection
temperature 51℃(See power-off
protection)
18/38
℃
heating