MALTEC PT3800Wt Instruction Manual page 17

Display symbol description:
： FAN
： Low heat 1000W
：High heat 2000W
：Timer
： Week timer
：Light on:
set temperature mode,
temperature range 18-45℃
Light flickering:
Open window detection start up.
PTC-3020L-E with Remote control. without Swing function.
Remote control:
Press "
when shutdown the appliance after heating).
Power
Press "
Heating
Press "
you can not set this timer function.
Timer
Press "
Swing
Note: PTC-3018L-E、PTC-3019L-E、PTC-3020L-E Without Swing function.
Set
temper
ature
mode
Set
Light
1、Turn on the power switch, LED display Environment
temperature, the appliance is standby.
2、At the right side of the appliance base have a switch,
Press "START/STOP", High heat, press again, the
appliance will shutdown.
3、All function need to be operated by remote control.
4、Fan keep working for 30 seconds when shutdown
the appliance(after heating)
Note: The indicator lights when corresponding function is
working
" as follows: ON(Fan working), OFF(Fan keep working for 30 seconds
" as follows: Low heat, High heat, FAN working.
" to set timer as follows: 1H,2H,3H.....8H. When week timer is start up,
" as follows:, SWING ON, SWING OFF
1、Press " ", set temperature mode is stand by, Press "+" "-" to adjust
temperature, Temperature range: 18-45℃.
Press "-",
Set temperature is equal to or lower than Environment temperature, stop
17/38