Table of Contents
Advertisement
Maintenance
Cleaning
Keep the washing machine clean to prevent deteriorated performance and to preserve its life
cycle.
Exterior
•
Use a soft cloth to wipe up all detergent, bleach, or other spills as they occur.
•
Clean the control panel with a soft, damp cloth. Do not use abrasive powders or cleaning
pads. Do not spray cleaners directly on the panels.
Eco Tub Clean
Regularly run this cycle to clean the tub and to remove bacteria from it.
1. Makes sure the tub is completely empty.
2. Press POWER to turn on the washing machine.
3. Press ECO TUB CLEAN. You can also use Delay End with Eco Tub Clean.
4. Press and hold START/PAUSE.
NOTE
If the washing machine is installed and used in a humid place, bacteria in the air may adhere
to the humid surface of the tub and foster mold growth, which is harmful to your health. To
keep your washing machine tub clean, use the Eco Tub Clean cycle once every 1-2 months (or
when the
Eco Tub Clean indicator turns on) to clean the tub.
CAUTION
Only run Eco Tub Clean when the tub is completely empty. This may cause damage to the
laundry or a problem with the washing machine.
•
Depending on the conditions and surroundings in which the washer is used, the degree of
contamination in the tub or the result of the Eco Tub Clean cycle may vary.
•
When using the Eco Tub Clean cycle, pour 200 ml of chlorine bleach evenly on the bottom
of the tub.
•
Excessive use of chlorine bleach may cause product malfunction.
•
Do not mix chlorine bleach with other substances (such as vinegar, citric and oxygen
bleach, etc.)
•
Mixing chlorine bleach with these substances can generate harmful gas.
•
When using chlorine bleach, make sure to ventilate the surrounding area.
•
If you have used the washing machine for a long time without cleaning the tub or if you
are cleaning the tub for the first time, some residue may remain in the tub after the Eco
Tub Clean cycle.
36 English
WA8700K(TSE)_DC68-03823P-00_EN.indd 36
8/18/2020 8:13:39 PM
Advertisement
Table of Contents
