Table of Contents
Advertisement
Special features
Child Lock
The Child Lock function locks the washer door to prevent children from climbing into and
suffocating inside the tub.
Activating the Child Lock function
Press and hold Wash Time and Rinse Times simultaneously for approximately 3 seconds.
•
When you activate the Child Lock function, the
Using the Child Lock function
If the lid is opened when the Child Lock function is on, "dC" is displayed and an alarm sounds.
•
If the water level in the tub is above the safe water level, "dC" is displayed on the LED
display and the washer starts to drain water by force after 30 seconds.
•
If the water level in the tub is above the safe water level and the Child Lock function is
turned on while the lid is open, "CL" is displayed on the LED display, even if the washer is
turned off, and the washer drains water by force.
•
When Child Lock is on and the washer is off, if the water in the tub is above the safe
water level and the lid is opened, "CL" is displayed on the LED display. No alarm sounds,
but the washer drains the water. When the draining operation finishes, the power
automatically turns off again.
•
If you activate the Child Lock function while the washer is running, the START/PAUSE
button will not work.
•
After the compulsory drain, "CL" blinks at 1 second intervals and the washer enters the
"CL" mode. (When the washer is in the "CL" mode, only the Power button works.)
•
To cancel the "CL" mode, turn the power off and then on again.
•
To cancel the "dC" mode, deactivate the Child Lock function. To deactivate the Child
Lock function, press and hold Wash Time and Rinse Times simultaneously for at least 3
seconds.
WA8700K(TSE)_DC68-03823P-00_EN.indd 33
Child Lock indicator blinks.
English 33
8/18/2020 8:13:38 PM
Advertisement
Table of Contents
