Section 8: Error Codes And Troubleshooting - Recon HUMMER EV Owner's Manual

All purchases made through authorized RECON dealers are subject to the dealer's return and refund polices. RECON
does not accept direct returns of products sold through authorized dealers. All products sold through dealers must be
returned to the original seller.

SECTION 8: ERROR CODES AND TROUBLESHOOTING

Error
Description
Code
04 Throttle Position Fault
05 Throttle Fault
06 Low Voltage Protection
07 High Voltage Protection
08 Hall Sensor Malfuction
09 Motor Phase Cable Fault
10 High Motor Temp
11 Motor Temp Sensor Fault
12 Current Sensor Fault
13 Battery Temp
14 High Controller Temp
15 Controller Temp Sensor Fault Check the Controller.
21 Speed Sensor Fault
22 BMS Communication Fault
30 Communication Fault
Troubleshooting Steps
Check if throttle has returned to home position.
Check the throttle connections.
Check the battery connections and charge state.
Check the battery connections and charge state.
Contact RECON Customer Service.
Check the motor module.
Stop Riding, turn the motor off and allow to cool. If
problem persists, contact RECON Customer Service.
Contact RECON Customer Service.
Check the controller.
Turn off the bike, remove the battery and ensure
proper connections. Allow the battery to cool. If
problem persists, contact RECON Customer Service.
Turn off the bike, remove the battery. Allow the
controller(s) to cool. If problem persists, contact RECON
Customer Service.
Check the position of the speed sensor.
Remove the battery. Contact RECON Customer Service.
Check the controller connections. Contact RECON
Customer Service.
18