Technical Details; The Acl Function; Care And Maintenance; Technical Specifications - Saitek Bullet User Manual

• If you press LEVEL and then decide not to change the playing
level or Teach Mode, simply press LEVEL again, and the current
game status will remain as is.
• If you do not press a square to select a new level, the current
level will remain in effect.
• If NEW GAME is pressed during any game, the computer will
switch back to the standard game, with the current playing level
still in effect.
• If you accidentally press a Piece Symbol key in Level Mode, you
will lose your current game after exiting Level Mode. To prevent
this and retain your current board position, press any key (except
NEW GAME, LEVEL, or a Piece Symbol key) to deselect Teach
Mode before exiting Level Mode.

5. TECHNICAL DETAILS

5.1 The ACL Function

Computers can sometimes "lock up" due to static discharge or other
electrical disturbances. If this happens, use a pin or another sharp
object to press into the hole marked ACL in the base of the unit for at
least one second. This resets the computer.

5.2 Care and Maintenance

Your computer is a precision electronic device, and should not be
subjected to rough handling or exposed to extreme temperatures or
moisture. Do not use chemical agents to clean the unit, as they may
damage the plastic. Weak batteries should be replaced promptly, since
they can leak and damage the computer.
Use only alkaline or zinc carbon batteries.
Non-rechargeable batteries are not to be recharged.
Different types of batteries or new and used batteries are not to be
mixed.
Only batteries of the same or equivalent type as recommended are
to be used.
Batteries are to be inserted with the correct polarity.
Exhausted batteries are to be removed from the unit.
The supply terminals are not to be short-circuited.

5.3 Technical Specifications

Clock Frequency:
Keys:
LED lamps:
Batteries:
Power Consumption:
Dimensions:
The manufacturer reserves the right to make technical changes without
notice in the interest of progress.
13
4 MHz
15
2 x 8 LEDs
4 x 1.5V "AA" (AM3/R6) cells
1,200 mW maximum
23 x 18.3 x 3.9 cm