Mitsubishi Electric MXZ-4E72VA-E1 Service Manual page 122

12-2. MXZ-4E83VA MXZ-5E102VA
OPERATING PROCEDURE
1. Removing the panels
(1) Remove the screws fixing the service panel, and remove
the service panel.
(2) Remove the screws fixing the top panel and remove the
top panel.
(3) Remove the screws fixing the handle (R Rear), and
remove the handle (R Rear).
(4) Disconnect the power supply and indoor/outdoor connect-
ing wire.
(5) Remove the screws fixing the front panel, and remove the
front panel.
(6) Remove the screws fixing the back panel, and remove
the back panel.
Photo 3
Catch of the front panel
Screws of the front panel
Screws of the front panel
Photo 4
Screws of the handle (R Rear)
OBH723G
Catch of the front panel
Remove
the handle
(R Rear).
122
NOTE: Turn OFF the power supply before disassembly.
PHOTOS
Photo 1
Screws of the top panel
Screws of the service panel
Photo 2
Screws of the top panel
Handle (R Rear)
Screws of the back panel