Mitsubishi Electric MXZ-4E83VA Installation Manual
Split-type air-conditioner
Hide thumbs
Also See for MXZ-4E83VA:
- Service manual (328 pages) ,
- Installation manual (88 pages) ,
- Service manual (124 pages)
Advertisement
Quick Links
Download this manual
See also:
Service Manual
Split-type Air-Conditioner
MXZ-4E83VA
MXZ-5E102VA
English is original.
Übersetzung des
Originals
Traduction du texte
d'origine
Vertaling van het
origineel
Traducción del
original
Traduzione
dell'originale
Μετάφραση του
αρχικού
Tradução do
original
Oversættelse af
den originale tekst
Översättning från
originalet
Orijinalin çevirisi
Версията на английски
език е оригинал
Installation Manual
• This manual only describes the installation of outdoor unit.
When installing the indoor unit, refer to the installation manual of indoor unit.
Installationsanleitung
• Diese Installationsanleitung gilt nur für die Installation des Außengerätes.
Zur Installation des Innengeräts siehe die Installationsanleitung für Innengeräte.
Notice d'installation
• Cette notice ne décrit que l'installation de l'appareil extérieur.
Lors de l'installation de l'appareil intérieur, consultez la notice d'installation de cet
appareil.
Installatiehandleiding
• Deze handleiding beschrijft alleen de installatie van de buitenunit.
Raadpleeg de installatiehandleiding van de binnenunit wanneer u deze instal-
leert.
Manual de instalación
• En este manual sólo se describe la instalación de la unidad exterior.
Para instalar la unidad interior, consulte el manual de instalación de dicha uni-
dad.
Manuale per l'installazione
• Questo manuale descrive solo l'installazione dell'unità esterna.
Per l'installazione dell'unità interna, fare riferimento al relativo manuale di instal-
lazione.
Εγχειρίδιο εγκατάστασης
• Στο παρόν εγχειρίδιο περιγράφεται μόνο η εγκατάσταση της μονάδας εξωτερικού χώρου.
Για την εγκατάσταση της μονάδας εσωτερικού χώρου, ανατρέξτε στο εγχειρίδιο
εγκατάστασης της μονάδας εσωτερικού χώρου.
Manual de Instalação
• Este manual descreve apenas a instalação da unidade exterior.
Quando proceder à instalação da unidade interior, consulte o manual de instalação
da unidade interior.
Installationshåndbog
• Denne håndbog beskriver kun, hvordan udendørsenheden installeres.
Vedrørende installation af indendørsenheden henvises til installationshåndbogen
for indendørsenheden.
Installationsanvisning
• Denna installationsanvisning beskriver endast installation av utomhusenheten.
Se den separata installationsanvisningen för inomhusenheten.
Kurulum Kılavuzu
• Bu kılavuzda yalnızca dış ünitenin kurulumu açıklanmaktadır.
İç ünite kurulum işlemini yaparken iç ünite kurulum kılavuzuna bakın.
Ръководство за монтаж
• Това ръководство описва само монтажа на външното тяло.
При монтиране на вътрешното тяло вижте ръководството за монтаж на въ-
трешното тяло.
For INSTALLER
Für INSTALLATEUR
Destinée à l'INSTALLATEUR
Voor de INSTALLATEUR
Para el INSTALADOR
Per il TECNICO INSTALLATORE
Για τον ΤΕΧΝΙΚΟ
Para o INSTALADOR
Til INSTALLATØREN
För INSTALLATÖREN
TESİSATÇI İÇİN
За ИНСТАЛАТОРА
English
Deutsch
Français
Nederlands
Español
Italiano
Ελληνικά
Português
Dansk
Svenska
Türkçe
Български
Advertisement
Related Manuals for Mitsubishi Electric MXZ-4E83VA
Summary of Contents for Mitsubishi Electric MXZ-4E83VA
- Page 1 Split-type Air-Conditioner MXZ-4E83VA MXZ-5E102VA For INSTALLER Installation Manual English is original. English • This manual only describes the installation of outdoor unit. When installing the indoor unit, refer to the installation manual of indoor unit. Für INSTALLATEUR Installationsanleitung Übersetzung des Deutsch • Diese Installationsanleitung gilt nur für die Installation des Außengerätes.
-
Page 2: Table Of Contents
Power outdoor con- per indoor unit / difference per indoor unit / adjustment Cooling Heating Voltage quency capacity supply necting wire for multi-system for multi system A *10 MXZ-4E83VA 25 m / 70 m 15 m 25 / 70 49 dB (A) 51 dB (A) 3-core 4-core 230 V 50 Hz 25 A 20 g/m 2.5 mm 1.0 / 1.5 mm MXZ-5E102VA 25 m / 80 m 15 m... - Page 3 1-3. SELECTING OPTIONAL DIFFERENT-DIAMETER JOINTS If the diameter of connection pipe does not match the port size of outdoor unit, use optional different-diameter joints according to the following table. (Unit: mm (inch)) Optional different-diameter joints (port size of outdoor unit → diameter of connection pipe) Port size of outdoor unit MXZ- MXZ-...
- Page 4 1-5. INSTALLATION DIAGRAM ACCESSORIES After the leak test, apply insulat- Check the following parts before installation. ing material tightly so that there is no gap. (1) Drain socket (2) Drain cap When the piping is to be attached to a wall containing metals (tin plated) or metal netting, use a chemically PARTS TO BE PROVIDED AT YOUR SITE treated wooden piece 20 mm or...
-
Page 5: Outdoor Unit Installation
2. OUTDOOR UNIT INSTALLATION 2-1. INSTALLING THE UNIT • Be sure to fix the unit’s legs with bolts when installing it. • Be sure to install the unit firmly to ensure that it does not fall by an earthquake or a gust. • Refer to the figure in the right for concrete foundation. • Do not use the drain socket and the drain caps in the cold region. Drain may freeze and it makes the fan stop. • Remove the tape on the panel when opening the package. (DO NOT remove the LABELS on the panel.) Anchor leg Fix here with M10 bolts. Anchor bolt length Anchor bolt pitch Make the setting depth deeper. -
Page 6: Flaring Work And Pipe Connection
3. FLARING WORK AND PIPE CONNECTION 3-1. FLARING WORK 1) Cut the copper pipe correctly with pipe cutter. (Fig. 1, 2) 2) Completely remove all burrs from the cut cross section of pipe. (Fig. 3) No good Good • Aim the copper pipe downward while removing burrs to prevent burrs Copper from dropping in the pipe. pipe 3) Remove flare nuts attached to indoor and outdoor units, then put them on pipe having completed burr removal. (Not possible to put them on after flaring work.) Tilted Uneven Burred 4) Flaring work (Fig. 4, 5). Firmly hold copper pipe in the dimension shown Fig. - Page 7 4-2. GAS CHARGE Perform gas charge to unit. Stop valve 1) Connect gas cylinder to the service port of stop valve. Liquid 2) Perform air purge of the pipe (or hose) coming from refrigerant gas cylinder. Union pipe 3) Replenish specified amount of the refrigerant, while operating the air conditioner Union for cooling. Indoor Outdoor unit unit Note: Union In case of adding refrigerant, comply with the quantity specified for the refrigerat- Stop valve with Gas ing cycle.
-
Page 8: Pumping Down
5. PUMPING DOWN When relocating or disposing of the air conditioner, pump down the system following the procedure below so that no refrigerant is released into the atmosphere. 1) Turn off the breaker. 2) Connect the gauge manifold valve to the service port of the stop valve on the gas pipe side of the outdoor unit. 3) Fully close the stop valve on the liquid pipe side of the outdoor unit. 4) Turn on the breaker. 5) Start the emergency COOL operation on all the indoor units. - Page 9 DECLARAÇÃO DE CONFORMIDADE CE ДЕКЛАРАЦИЯ СООТВЕТСТВИЯ НОРМАМ ЕС MITSUBISHI ELECTRIC CORPORATION, SHIZUOKA WORKS 18-1, OSHIKA 3-CHOME, SURUGA-KU, SHIZUOKA-CITY 422-8528, JAPAN hereby declares under its sole responsibility that the air conditioners and heat pumps described below for use in residential, commercial and light-industrial environments: erklärt hiermit auf seine alleinige Verantwortung, dass die Klimaanlagen und Wärmepumpen für das häusliche, kommerzielle und leicht-industrielle Umfeld wie unten beschrieben:...