Helmet Holder; Adjusting The Shock Absorber Assembly - Yamaha Star 2009 Owner's Manual

Helmet holder

1
1. Helmet holder
The helmet holder is located under the
rider seat.
To secure a helmet to the helmet
holder
1. Remove the rider seat. (See page
3-14.)
2. Hook the helmet onto the helmet
holder, and then securely install
the seat. WARNING! Never ride
with a helmet attached to the
helmet holder, since the helmet
may hit objects, causing loss of
control and possibly an acci-
dent.
[EWA10161]
INSTRUMENT AND CONTROL FUNCTIONS
EAU14322 To release the helmet from the hel-
met holder
Remove the rider seat, remove the hel-
met from the helmet holder, and then
install the seat.
Adjusting the shock absorber
assembly
1. Panel A
2. Spring preload adjusting ring
This shock absorber assembly is
equipped with a spring preload adjust-
ing ring, allowing the spring preload to
be adjusted to suit the rider's prefer-
ence.
G
3-15
2
When making this adjustment, use
the special wrench and extension
bar included in the additional tool
kit, which was handed out sepa-
rately at the purchase of the vehi-
cle.
EAU48380
1
3