Table of Contents
Advertisement
20.
If it is necessary to replace the WLAN antenna cables, peel the antennas from the top of the display
enclosure (1), remove the antenna cables from the routing path on the bottom of the display enclosure
(2), and then remove the antenna cables (3).
NOTE:
21.
If it is necessary to replace the WWAN antenna cables, peel the antennas from the top of the display
enclosure (1), remove the antenna cables from the bottom and sides of the display enclosure (2), and
then remove the antenna cables (3).
NOTE:
The display enclosure is available using spare part number L15501-001 for models without a WWAN
module and L15502-001 for models with a WLAN module.
Reverse this procedure to reassemble and install the display assembly.
80
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
The WLAN antennas are spared with the display enclosure.
The WWAN antennas are spared with the display enclosure.
Advertisement
Table of Contents
