Adding 2-Stroke Oil - Husqvarna TX 300i 2021 Owner's Manual

8.9

Adding 2-stroke oil

Warning
Engine failure The engine will not be lubricated unless there is 2-stroke oil in the oil tank.
If the oil level warning light lights up, the 2-stroke oil is sufficient for the remaining tank of fuel.
–
As soon as the oil level warning light lights up, ride for no longer than until the remaining fuel in the
tank is depleted.
–
At the next opportunity add 2-stroke oil before you refuel.
–
Time the oil pump if the 2-stroke oil hose has been removed or the 2-stroke oil tank has been fully
depleted in error.
–
Open 2-stroke oil tank cap. (
–
Fill the 2-stroke oil tank up to the lower edge
neck.
Guideline
Only use 2-stroke oil which is appropriate for separate
lubrication.
2-stroke oil tank
content approx.
–
Close 2-stroke oil tank cap. (
V01565-10
RIDING INSTRUCTIONS 8
p. 17)
A
of the filler
0.6 l (0.6 qt.) Engine oil, 2-stroke
( p. 138)
p. 18)
33