Subscribe to Our Youtube Channel
Related Manuals for Rosco DV6
Summary of Contents for Rosco DV6
- Page 1 User Manual Rosco Vision Systems DV6 User Manual Document: OMM-0019-DO Version: 7 1/17/2023...
-
Page 2: Table Of Contents
3.1 Device Description ..........................4 3.2 Key Features ............................4 4. DV6 Components ..............................5 5. Package Contents ............................... 5 6. DV6 Power Harness Option ..........................6 7. LED Indicators ..............................7 8. Installation ................................8 9. Fleet Management via RoscoLive ........................8 10. -
Page 3: Fcc And Ic Compliance Notice
DO NOT route harnesses or wires with or without zip ties in front of any airbags 2.2 Usage • The DV6 is intended to function as a driver aid and is NOT a replacement for a safe, attentive, well- trained driver. The DV6 cannot counteract a driver who is impaired due to drowsiness, distraction, fatigue, drugs, or alcohol. -
Page 4: Product Overview
3. Product Overview 3.1 Device Description The Rosco DV6 is an AI-Enhanced dual-channel commercial grade drive-recorder built for fleet management 3.2 Key Features • 2 Channels, 1080p FHD Resolution • Optional Third Camera (STSC601), 1080p FHD Resolution • Adjustable Video Quality •... -
Page 5: Dv6 Components
4. DV6 Components 5. Package Contents 3M™ PRIMER PEN WITH ALCOHOL WIPES DV601 CAMERA UNIT SD CARD & DV602 CAMERA MOUNT (128 GB CARDPRE-INSERTED WITH 3M TAPE SIM CARD (PRE-INSERTED) T5/T8 SECURITY TORX WRENCH 4” AND 8” ZIP TIES T20 SECURITY TORX WRENCH DV608 SD/SIM SIDE COVER Selected power harness (see Power Harness Option in the next section) is included in the box. -
Page 6: Dv6 Power Harness Option
6. DV6 Power Harness Option 1) DV665 – OBD II vehicle connection. 2) DV672 – J1939 Vehicle Connection 3) DV673 – Direct Vehicle Wiring Connection Rosco Vision Systems DV6 User Manual Document: OMM-0019-DO Version: 7 1/17/2023... -
Page 7: Led Indicators
LED Indicators The DV6 is equipped with three status indicators. Upon powering up, the device should go from the “Device Bootup” state to the “Device Ready” state. After the installation, once the device is in the recording state, the device will attempt to connect to RoscoLive indicated by a flashing green LED and once connected, the green LED will turn solid. -
Page 8: Installation
Install “Installer Mobile App” and follow all installation instruction steps. To successfully install the DV6 your cell phone must have the latest IOS/ Android “Rosco Installer” application. To install, please scan the QR Code below, or scan the QR code label on the DV6. -
Page 9: Optional 3Rd Camera And Ahd Video Converter
DRIVER ID - BACK When DV6 is powered on and prompted “SCAN Driver ID CARD” • Hold driver ID card with QR code facing DV6 lens 6-12” away as shown in FIG. 2 until DV6 confirms “Driver ID SCANNED” •... -
Page 10: Troubleshooting Guide
Camera has solid Red LED status Contact Rosco Technical Support Camera is booting- allow up to 30 seconds for the camera to Camera has 3 flashing LEDs boot. If continuous flashing, contact Rosco Technical Support. For technical support: Call: (718) 947-5363 Email: techsupport@roscovision.com... - Page 11 A CENTURY OF AUTOMOTIVE VISION SAFETY 90-21 144th Place, Jamaica, New York 11435 Tel. - (718) 526-2601 • Toll Free - (800) 227-2095 techsupport@roscovision.com www.roscovision.com Rosco Vision Systems DV6 User Manual Document: OMM-0019-DO Version: 7 1/17/2023...
Need help?
Do you have a question about the DV6 and is the answer not in the manual?
Questions and answers