Stanley FATMAX V20 Lithium Ion SFMCD710 Original Instructions Manual page 11

Technical data
Voltage
No-load speed
Max. torque
Chuck capacity
Max Drilling capacity
Steel/wood
Weight
Charger SFMCB10
Input Voltage V 230
AC
Output Voltage V 18
DC
Current A 1.25
Battery SFMCB201
Voltage
18
V
DC
Capacity Ah 1.5
Type
Li-Ion
Level of sound pressure according to EN62841:
Sound pressure (L ) 74.0 dB(A), uncertainty (K) 5 dB(A)
pA
Sound power (L ) 85.0 dB(A), uncertainty (K) 5 dB(A)
WA
Vibration total values (triax vector sum) according to EN62841:
2
Drilling into metal (a ) 1.7 m/s
h, D
EC declaration of conformity
%
MACHINERY DIRECTIVE
SFMCD710 - Drill
STANLEY FATMAX Europe declares that these products
described under EN62841-1:2015, EN62841-2-
1:2018+A11:2019.
These products also comply with Directive 2006/42/EC,
2014/30/EU and 2011/65/EU. For more information, please
contact STANLEY Europe at the following address or refer to
the back of the manual.
For more information, please contact STANLEY FATMAX at
the following address or refer to the back of the manual.
SFMCD710
V
DC
0-600 / 0-1900RPM
-1
Min
Nm
mm
mm
kg 1.2 (without battery)
SFMCB11 SFMCB12
230 230
18 18
1.25 2
SFMCB202 SFMCB204 SFMCB206
18 18
2.0 4.0
Li-Ion Li-Ion
2
, uncertainty (K) 1.5 m/s
(Original instructions)
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of
18V
60
1.5-13
13/30
SFMCB14
230
THE SUPPLY OF MACHINERY (SAFETY)
18
4
18
STANLEY FATMAX declares that these products described
6.0
under "technical data" are in compliance with:
Li-Ion
The Supply of Machinery (Safety) Regulations, 2008, S.I.
EN62841-1:2015, EN62841-2-1:2018+A11:2019. These
products also conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016,
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
For more information, please contact STANLEY FATMAX at
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of STANLEY
Vice President Professional Power Tools EANZ GTS
STANLEY FATMAX.
General Manager, Benelux
Egide Walschaertsstraat 14-18
2800 Mechelen, Belgium
Declaration of conformity
REGULATIONS 2008
SFMCD710 - Drill
2008/1597 (as amended),
S.I.2016/1091 (as amended).
2012/3032 (as amended).
FATMAX
STANLEY FATMAX UK,
270 Bath Road, Slough
ENGLISH
Patrick Diepenbach
STANLEY FATMAX,
30/12/2021
Karl Evans
Berkshire SL1 4DX
England
30/12/2021
11