Related Manuals for Stanley FATMAX SFMCD711
Summary of Contents for Stanley FATMAX SFMCD711
- Page 1 SFMCD711 www.stanleytools.co.nz...
-
Page 3: Safety Instructions
ENGLISH (Original instructions) Intended use Your STANLEY FATMAX SFMCD711 Hammer drill has been designed for screwdriving applications and for drilling in wood, metal, plastics and soft masonry. This appliance is intended for professional and private, non professional users.. Safety instructions... - Page 4 ENGLISH (Original instructions) b. Avoid body contact with earthed or grounded h. Do not let familiarity gained from frequent use of surfaces such as pipes, radiators, ranges and tools allow you to become complacent and ignore refrigerators. There is an increased risk of electric shock tool safety principles.
-
Page 5: Residual Risks
ENGLISH (Original instructions) The use of any accessory or attachment or c. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, performance of any operation with this tool other than those recommended in this instruction manual may nails, screws, or other small metal objects, that can present a risk of personal injury and/or damage to... - Page 6 The battery needs to be charged before first use and whenever it fails to produce sufficient power on jobs that were Use your Stanley FatMax charger only to charge the easily done before. battery in the tool with which it was supplied. Other The battery may become warm while charging;...
- Page 7 ENGLISH (Original instructions) Charger LED Modes To install battery pack (Fig. C) Insert battery pack firmly into tool until an audible click is heard as shown in figure C. Ensure battery pack is fully Charging: seated and fully latched into position. Green LED Intermittent To remove battery pack (Fig.
- Page 8 ENGLISH (Original instructions) Screw driving Warning! Do not attempt to tighten or loosen drill bits (or any other accessory) by gripping the front part of For driving fasteners, the forward/reverse button should the chuck and turning the tool on. be pushed to the left. Use reverse (button pushed to the right) for removing Damage to the chuck and personal injury may occur when changing accessories.
-
Page 9: Troubleshooting
Maintenance Sound power (L ) 97.5 dB(A), uncertainty (K) 5 dB(A) Your STANLEY FATMAX tool has been designed to operate over a long period of time with a minimum of maintenance. Vibration total values (triax vector sum) according to EN62841:... -
Page 10: Ec Declaration Of Conformity
Black & Decker at the following address or refer to the back of the manual. For more information, please contact STANLEY FATMAX at the following address or refer to the back of the manual. The undersigned is responsible for compilation of the techni- cal file and makes this declaration on behalf of STANLEY FATMAX. - Page 12 Australia & New Zealand Stanley Black & Decker www.stanleytools.com.au www.stanleytools.co.nz Tel.1800 338 002 (Aust) or Tel. 0800 339 258 (NZ) 810 Whitehorse Road Box Hill VIC 3128, Australia NA070845 09/2021...