Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Stanley FATMAX SFMCD715M2K
Summary of Contents for Stanley FATMAX SFMCD715M2K
- Page 1 SFMCD715...
- Page 2 English (original instructions)
-
Page 4: Intended Use
ENGLISH (Original instructions) Intended use Your STANLEY FATMAX SFMCD715 Hammerdrill/ Screwdriver has been designed for screwdriving applications and for drilling in wood, metal, plastics and soft masonry. This appliance is intended for professional and private, non- professional users. Safety instructions... - Page 5 (Original instructions) ENGLISH Do not use any adapter plugs with earthed (grounded) g. If devices are provided for the connection of dust power tools. Unmodified plugs and matching outlets will extraction and collection facilities, ensure these are connected and properly used. Use of dust collection reduce risk of electric shock.
-
Page 6: Safety Instructions For All Operations
ENGLISH (Original instructions) likely to bend if allowed to rotate freely without contacting b. Use power tools only with specifically designated battery packs. Use of any other battery packs may create the workpiece, resulting in personal injury. b) Always start drilling at low speed and with the bit a risk of injury and fire. - Page 7 Chargers The battery needs to be charged before first use and Use your STANLEY FATMAX charger only to charge whenever it fails to produce sufficient power on jobs that were the battery in the tool with which it was supplied. Other easily done before.
- Page 8 ENGLISH (Original instructions) feature ensures maximum battery life. temperature: approx. 24 °C. Note: The charger will not charge a battery if the cell Battery state of charge indicator (Fig. B) temperature is below approximately 10 °C or above 40 °C. The battery includes a state of charge indicator to quickly The battery should be left in the charger and the determine the extent of battery life as shown in figure B.
- Page 9 (Original instructions) ENGLISH are available. tightening the screw. Please visit our website www.stanley.eu/3 for Repeat until you reach the correct setting. further information. Use this setting for the remaining screws. Keyless chuck (Fig. G) Dual range switch (Fig J) Warning! Make certain the battery pack is removed to prevent The dual range feature of your drill allows you to shift gears tool actuation before installing or removing accessories.
-
Page 10: Troubleshooting
Maintenance Holes in wood can be made with the same twist drill bits used Your STANLEY FATMAX tool has been designed to operate for metal or with spade bits. These bits should be sharp and over a long period of time with a minimum of maintenance. -
Page 11: Technical Data
Charger SFMCB11 SFMCB12 SFMCB14 the manual. Input Voltage For more information, please contact STANLEY FATMAX at Output Voltage the following address or refer to the back of the manual. Current 1.25 The undersigned is responsible for compilation of the technical... -
Page 12: Declaration Of Conformity
ENGLISH (Original instructions) Declaration of conformity Guarantee STANLEY FATMAX is confident of the quality of its products THE SUPPLY OF MACHINERY (SAFETY) and offers consumers a 12 month guarantee from the date REGULATIONS 2008 of purchase. This guarantee is in addition to and in no way prejudices your statutory rights. - Page 13 United Kingdom STANLEY FATMAX Tel. 01753 511234 270 Bath Road Fax 01753 572112 Slough, Berkshire SL1 4DX www.stanleytools.co.uk NA091515 REV-1 09/2021...
Need help?
Do you have a question about the FATMAX SFMCD715M2K and is the answer not in the manual?
Questions and answers