Table of Contents
Advertisement
Installation and Setup
WindPro Sensor Installation
WindPro's package comes with a Magnetic Sensor Mounting Bracket that supports fast and flexible
installation.
1. Loosen the clamp
2. Insert the sensor body from the bottom of the clamp
3. Tighten the clamp
4. Apply wind cups on wind sensor bearing
5. Make sure you hear a "CLICK" sound that indicates all parts are locked in place.
6. Attach the bracket on the desired magnetic surface
Note: Always do orientation correction after deploy the wind sensor. (see Wind Direction Sensor
Correction, P21)
Console Installation
WindPro's Console Holder kit comes with an quick-release support holder with magnetic mount
base, a metal flake with one-time adhesive pad, and a quick-release slot with one-time adhesive pad.
1. Clear and dry the mounting surface
2. Peel off the backing paper of the adhesive pads of the metal flake, press and hold it on the
mounting surface for 10 seconds
3. Peel off the backing paper of the adhesive pads of the quick-release slot, press and hold it on the
back of the WindPro Console for 10 seconds
4. Align the quick-release mounting coupler and attach WindPro's Console to the holder.
5. Adjust the viewing angle by altering the spherical and swiveling joints
Paste
Here
Console (Back)
Press to release
2
CLICK
Push to lock
3
1
Slide
Holder
20
CLICK
N
Metal
Magnetic
Flake
Paste Anywhere
Advertisement
Table of Contents
