Download Print this page
Cooper Lighting Shaper 482 Specification Sheet
Cooper Lighting Shaper 482 Specification Sheet

Cooper Lighting Shaper 482 Specification Sheet

Cooper lighting indoor lighting specification sheet

Advertisement

Quick Links

SHAPER
482 SERIES
482 Luminous Cylinder features Accent
Trim Bars and Finials and is a
available in two diameters with
multiple mounting options.
Notes:
1. Available in 10".
2. Available in 12".
3. Available with CFL only.
4. Consult the factory for available options.
5. Consult factory for alternative trim patterns, perf and color inserts.
6. Supplied by others.
7. Specify up to 45°.
494 SERIES
The 494 Direct/Indirect Pendant features
a luminous bowl with double ring trim
and is available in three diameters with
multiple mounting options.
Sample Number: 494-34-CFL/8/32-347V-SCL-22
Series
494 = Luminous Bowl
w/ Double Ring Trim
966
COOPER LIGHTING
5" ø
42"
24"
10" ø STANDARD
Sample Number: 482-12-CFL/4/40-347V-OBRS-__
Sample Number: 482-12-CFL/4/40-347V-OBRS-__
Series
Size
482=
10"
Cylinder w/ Accent
12"
Trim Bars and Finials
12"-D
Finish
MW (standard),
CC, OBRS, PB,
PC, PCP, SAL,
SB, SC, SCL,
SCP
22" STANDARD
Size
Lamp
Voltage
Finish
22"
CFL/4/13
1
120V
MW (standard),
34"
CFL/4/26
1, 2
277V
4
CC, OBRS, PB,
PC, PCP, PN,
40"
CFL/4/32
2
347V
4
CFL/4/39
3
SAL, SB, SC,
CFL/4/42
3
SCL, SCP, SN,
SNL
CFL/8/26
2
CFL/8/27
CFL/8/32
2
CFL/8/42
3
INC/3/75
1
2
INC/3/100
INC/6/100
3
5" ø
3/4"
3/4"
54"
30"
12" ø STANDARD
Downlight
Lamp
Voltage
Lamp
CFL/4/39
1
120V
HAL/1/150
2
CFL/4/40
2
277V
CFL/4/50
2
347V
CFL/4/55
2
INC/6/75
1
INC/6/100
2
Suspension
Options
Height
3S
SCA
7
42'' (OA) - 10'' cyl.
DL
FC
54'' (OA) - 12'' cyl.
DM
4
HTB
Or Specify
IEM
2
HTB/V
PI
5
TB
6
VTB
REM
34" STANDARD
40" STANDARD
Options
Suspension Height
1S
24'' (OA) - 22'' dia.
3S
32'' (OA) - 34'' dia.
QP
38'' (OA) - 40'' dia.
SJCAC
Or Specify
SJWAC
SSS2B
SSS3B
SSS4B
TP
Notes:
DL
1. Available in 22".
DM
6
2. Available in 34".
3. Available in 40".
IEM
2, 3
4. Available with CFL only.
REM
7
5. For polished finishes the bottom inside edge of the ring is satin to prevent upper ring reflections.
SCA
8
6. Consult the factory for available options.
7. Supplied by others.
FB
8. Not available with 1SAC, SJWAC or SJCAC. Specify up to 45°.
TB
MATERIAL
LAMP/SOCKET
Solid brass or aluminum
10": Four (4) 39W (2G11)
housing and decorative
high lumen CFL lamps or
trim/finials. Matte
six (6) 75W A-19 lamps.
acrylic luminous cylinder.
12": Four (4) 40W, 50W or
Regressed aluminum
55W (2G11) high lumen
louver frame and 1/2" x
CFL lamps or six (6) 100W
1/2" cube cell louver. One
A-19 lamps.
5/8" stem is standard
12" Downlight (D): One
suspension. Hang height
(1) 150WPAR38H. CFL
(10" cylinder) of 42" (OA),
socket injection molded
minimum 34" (OA) and
plastic. INC socket fired
(12" cylinder) 54" (OA),
ceramic rated for 660W-
minimum 40" (OA).
250V. Lamps furnished by
Supplied with a swivel
others.
canopy which will
accommodate up to 45°
FINISH AND OPTIONS
total adjustment.
See page 1020 for finish
details and options.
3
BALLAST
3
Integral electronic HPF,
multi-volt 120/277V (347V
Canada), thermally
protected with end-of-life
circuitry to accommodate
the specified lamp
wattage.
INSTALLATION
Two circuit wiring.
Supplied with either a
circle strap mounting
canopy or bar strap that
mounts to a 4" J-box or
plaster ring. Integral
safety cable provided.
MATERIAL
LAMP/SOCKET
Painted and plated cold
22": Four (4) 13W (2GX7)
rolled steel or natural
4-pin low wattage CFL
aluminum. Matte white
lamps, 26W (GX24q-3)
acrylic bowl. Single
4-pin quad CFL lamps or
Stem Aircraft Cable
three (3) 75W A-19 lamps.
(Standard): One 5/8"
34": Four (4) or eight (8)
stem and three or four
26W or 32W (GX24q-3)
3/32" cables with a
4-pin triple CFL lamps or
standard hang height of
three (3) 100W A-19
24" (OA), minimum 20"
lamps.
(OA).
40": Four (4) or eight (8)
39W (2G11) high lumen
BALLAST
CFL lamps, 42W (GX24q-
Integral electronic HPF,
4) 4-pin triple CFL lamps
multi-volt 120/277V (347V
or six (6) 100W A-19
Canada), thermally
lamps. CFL socket
protected with end-of-life
injection molded plastic.
circuitry to accommodate
INC socket fired ceramic
the specified lamp
rated for 660W-250V.
wattage.
Lamps furnished by
others.
INSTALLATION
Supplied with either a
FINISH AND OPTIONS
circle strap mounting
See page 1020 for finish
canopy or bar strap that
details and options.
mounts to a 4" J-box or
plaster ring. Integral
safety cable provided.

Advertisement

loading
Need help?

Need help?

Do you have a question about the Shaper 482 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel