Daikin EPRA18DAW1 Installer's Reference Manual page 241

Field settings table
Breadcrumb Field code Setting name
└─ Heating WD curve
3.5 [0-00] Leaving water value for high ambient temp. for LWT add zone heating WD curve.
3.5 [0-01] Leaving water value for low ambient temp. for LWT add zone heating WD curve.
3.5 [0-02] High ambient temp. for LWT add zone heating WD curve.
3.5 [0-03] Low ambient temp. for LWT add zone heating WD curve.
└─ Cooling WD curve
3.6 [0-04] Leaving water value for high ambient temp. for LWT add zone cooling WD curve.
3.6 [0-05] Leaving water value for low ambient temp. for LWT add zone cooling WD curve.
3.6 [0-06] High ambient temp. for LWT add zone cooling WD curve.
3.6 [0-07] Low ambient temp. for LWT add zone cooling WD curve.
Additional zone
3.7 [2-0D] Emitter type
└─ Setpoint range
3.8.1 [9-05] Heating minimum
3.8.2 [9-06] Heating maximum
3.8.3 [9-07] Cooling minimum
3.8.4 [9-08] Cooling maximum
Additional zone
3.A [C-06] Thermostat type
└─ Delta T
3.B.1 [1-0C] Delta T heating
3.B.2 [1-0E] Delta T cooling
Additional zone
3.C WD curve type
Space heating / cooling
└─ Operation range
4.3.1 [4-02] Space heating OFF temp
4.3.2 [F-01] Space cooling OFF temp
Space heating / cooling
4.4 [7-02] Number of zones
4.5 [F-0D]
Pump operation mode
4.6 [E-02] Unit type
└─ Pump limitation
4.8.1 [9-0E] Main zone
4.8.2 [9-0D] Additional zone
Space heating / cooling
4.9 [F-00] Pump outside range
4.A [D-03] Increase around 0°C
4.B [9-04] Overshoot
4.C [2-06] Antifrost
Tank
5.2 [6-0A] Comfort setpoint
(*1) *6V_
(*2) *9W_
(*3) + EKHVCONV2
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/O
R/W
R/W
R/W
R/W
R/W (*3)
R/O
R/W
R/W
R/W
R/W
R/W
R/W
R/W
(#) Only applicable in Swedish language.
Range, step
Default value
[9-05]~min(45,[9-06])°C, step: 1°C
[2-0C]=0
25°C
[2-0C]=1
35°C
[2-0C]=2
35°C
[9-05]~[9-06]°C, step: 1°C
[2-0C]=0
35°C
[2-0C]=1
45°C
[2-0C]=2
65°C
10~25°C, step: 1°C
15°C
-40~5°C, step: 1°C
-15°C
[9-07]~[9-08]°C, step: 1°C
[2-0C]=0
18°C(*3)
[2-0C]=1
7°C(*3)
[2-0C]=2
18°C(*3)
[9-07]~[9-08]°C, step: 1°C
22°C(*3)
25~43°C, step: 1°C
35°C(*3)
10~25°C, step: 1°C
20°C(*3)
0: Underfloor heating
1: Fancoil unit
2: Radiator
15~37°C, step: 1°C
25°C
[2-0D]=2:
37~70, step: 1°C
70°C
[2-0D]≠2:
37~55, step: 1°C
55°C
5~18°C, step: 1°C
7°C(*3)
18~22°C, step: 1°C
22°C(*3)
0: -
1: 1 contact
2: 2 contacts
3~10°C, step: 1°C
10°C
3~10°C, step: 1°C
5°C(*3)
0: 2-points
1: Slope-Offset
14~35°C, step: 1°C
35°C
10~35°C, step: 1°C
20°C(*3)
0: 1 LWT zone
1: 2 LWT zones
0: Continuous
1: Sample
2: Request
0: Reversible (*3)
1: Heating only
0~8, step:1
0 : No limitation
1~4 : 50~80%
5~8 : 50~80% during sampling
6
0~8, step:1
0 : No limitation
1~4 : 50~80%
5~8 : 50~80% during sampling
6
0: Restricted
1: Allowed
0: No
1: increase 2°C, span 4°C
2: increase 4°C, span 4°C
3: increase 2°C, span 8°C
4: increase 4°C, span 8°C
1~4°C, step: 1°C
1°C
0: Disabled
1: Enabled
30~[6-0E]°C, step: 1°C
60°C
3/11
Installer setting at variance with
default value
Date
Value
4P586462-1 - 2019.07