Showing Device Statistics - SMC Networks SMC7724M Management Manual

C
ONFIGURING THE
Web Interface
Click IGMP/GMP Member Port Table. Specify the interface attached to a
multicast service (via an IGMP-enabled switch or multicast router),
indicate the VLAN that will propagate the multicast service, specify the
multicast IP address, and then click "Apply."
Command Line Interface
This example assigns a multicast address to VLAN 1, and then displays the
known multicast services supported on VLAN 1.
Console(config)#ip igmp snooping vlan 1 static 224.0.0.12
ethernet 1/12
Console(config)#exit
Console#show bridge 1 multicast vlan 1
VLAN M'cast IP addr. Member ports Type
---- --------------- ------------ -------
1
1
Console#

Showing Device Statistics

You can display standard statistics on network traffic from the Interfaces
Group and Ethernet-like MIBs, as well as a detailed breakdown of traffic
based on the RMON MIB. Interfaces and Ethernet-like statistics display
errors on the traffic passing through each port. This information can be
used to identify potential problems with the switch (such as a faulty port or
unusually heavy loading.) RMON statistics provide access to a broad range
of statistics, including a total count of different frame types and sizes
2-92
S
WITCH
224.0.0.12 Eth1/12
224.1.2.3 Eth1/12
USER
IGMP
3-115
3-117