Queue Cos-Map - SMC Networks SMC7724M Management Manual

Command Usage
WRR allows bandwidth sharing at the egress port by defining
scheduling weights.
Example
The following example shows how to assign WRR weights of 1, 3, 5 and 7
to the CoS priority queues 0, 1, 2 and 3:
Console(config)#queue bandwidth 1 3 5 7
Console(config)#
Related Commands
show queue bandwidth

queue cos-map

Use this command to assign class of service (CoS) values to the CoS
priority queues. Use the no form set the CoS map to the default values.
Syntax
queue cos-map queue_id [cos1 ... cosn]
no queue cos-map
• queue_id - The queue id of the CoS priority queue.
• Ranges are 0 to 3, where 3 is the highest CoS priority queue.
• cos1 .. cosn - The CoS values that are mapped to the queue id. It is
a space-separated list of numbers. The CoS value is a number
from 0 to 7, where 7 is the highest priority.
P C
RIORITY OMMANDS
3-127