C
ONFIGURING THE
Web Interface
Click IGMP/Multicast Router Port Information. Select the required
VLAN ID from the scroll-down list to display the associated multicast
routers.
Command Line Interface
This example shows that Port 11 has been statically configured as a port
attached to a multicast router.
Console#show ip igmp snooping mrouter vlan 1
VLAN M'cast Router Port Type
---- ------------------ -------
1
Specifying Interfaces Attached to a Multicast Router
Depending on your network connections, IGMP snooping may not always
be able to locate the IGMP querier. Therefore, if the IGMP querier is a
known multicast router/switch connected over the network to an interface
(port or trunk) on your switch, you can manually configure that interface
to join all the current multicast groups. This ensures that multicast traffic is
passed to all appropriate interfaces within the switch.
2-88
S
WITCH
Eth 1/11 Static
3-123