Table of Contents
Advertisement
NLTroubleshooting
19 Troubleshooting
You can remedy minor faults on the device yourself. Before contacting customer
service, please refer to the troubleshooting information. This way you avoid
unnecessary costs.
WARNING
Risk of electric shock! Improper repairs
are dangerous.
Only trained specialist personnel may carry out repairs on the device.
▶
Only original spare parts may be used for repair of the device.
▶
If the power cord of this appliance is damaged, it must be replaced by the
▶
manufacturer, its service agent or a similarly qualified person in order to avoid
a hazard.
Malfunction
wrinkling.
Spinning noise during
the drying phase.
Drying time is too long.
44
Cause and Troubleshooting
The load quantity is too high.
The laundry is left in the drum for too long after drying.
Remove the laundry from the drum immediately after
1.
drying.
Spread the items out to let them cool.
2.
Inappropriate program set for the type of fabric.
Set the appropriate program for the type of fabric.
▶
Easy care textiles dried too long.
Thermospin active.
Ambient temperature is higher than 30°C.
Make sure the ambient temperature is below 30°C.
▶
Insufficient air circulation at the location of the
device.
Ventilate the installation site of the device.
▶
In the drum his fluff has collected.
Run the programCleaning the drum
▶
laundry and detergent.
without
Advertisement
Table of Contents
