Table of Contents
Advertisement
Acoustic signal
To activate or deactivate the acoustic signal, proceed as follows:
1.
Turn the "Browse" knob to display "SOUND.
2.
Press
to access the setting (ON/OFF).
3
3.
Turn the "Browse" knob to select the desired setting and confirm by pressing button
Brightness
To change the display brightness, proceed as follows:
1.
Turn the "Browse" knob to display "BRIGHTNESS.
2.
Press button
: number 1 appears on the display.
3
3.
Turn the "Browse" knob to increase or decrease brightness and confirm by pressing
AUTOMATIC OVEN CLEANING
For the description of this function, see the chapter CLEANING and the functions table at pag. 14.
To activate the oven's automatic cleaning cycle (pyro-cleaning), proceed as follows:
1.
Turn the "Functions" knob to symbol
2.
Press button
to confirm your choice and start the pyro-cleaning cycle.
3
To select ECO pyro-cleaning, turn the "Browse" knob: the word ECO appears bottom right on the display. Press button
the shorter programme.
During pyro-cleaning, the oven door is automatically locked and the symbol
at the end of the cleaning cycle: "COOL" appears on the display, indicating the oven is still cooling down. When the oven cools
to a safe temperature, the symbol
NOTE: the automatic door lock control procedure fails to execute properly, the symbol
other hand, the door remains closed due to a fault in the locking system,
case, contact the After-sales Service.
: the word PYRO appears on the display.
switches off and the display shows "END".
EN13
.
3
.
3
appears on the display. The door remains locked
appears on the display. If, on the
and "DOOR LATCHED" appear on the display. In this
to start
3
Advertisement
Table of Contents
