Polaris Freedom 2002 Owner's Safety And Maintenance Manual page 100

SPECIAL PROCEDURES
MFI Operation
The bottom row of alphanumeric characters is a versatile display that
normally displays battery voltage, distance traveled, and engine hours.
These displays will be overwritten in the event of a warning condition,
or if an optional function is selected, such as security lock, speed limit,
or real time digital display.
PRIMARY FUNCTIONS
ON/AUTO: The MFI will automatically "wake-up" when the engine
start button is pressed or alternately by pressing and holding any button
for 1 second.
AUTO OFF: The MFI will return to sleep mode after 5 minutes of
inactivity. While in sleep mode, the clock continues to show time, and
the fuel level, oil level, and the compass rose are displayed. If the
SECURITY LOCK is active, the display will also show "LOCKED."
TACHOMETER: The analog tachometer visually displays the
revolutions per minute (RPM) of the engine in 200 rpm increments
from 0 to 8000 rpm. For more accurate RPM readings, see "DISPLAY"
below.
FUEL GAUGE: Displays fuel level in exact 1/8 tank increments.
Toggles "LOW FUEL" warning and flashes the warning LED when
fuel reaches 1/8 level. Pressing any key will disable the flashing LED
for 15 minutes.
OIL GAUGE: Displays oil level in exact 1/4 tank increments.
Toggles "LOW OIL" warning and flashes the warning LED when oil
reaches 1/4 level. Pressing any key will disable the flashing LED for
15 minutes.
COMPASS: The compass displays true vehicle heading relative to
magnetic north with a resolution of 16 points per revolution. The
triangular pointer rotates to indicate the direction of travel.
CLOCK: The center of the LCD display contains a digital clock. To
set the clock, simply press and hold the "CLOCK SET" button until
the clock digits begin to flash. Each subsequent press of the CLOCK
button advances the time by 1 minute. Pressing and holding the button
will automatically advance the digits more rapidly. Once the intended
time is reached, simply release the button. After 5 seconds, the MFI
will automatically exit the "clock set" mode.
98