SATO CX200 Programming Manual page 58

CX200 Programming Guide
Page 54
2. If any part of an image is placed past the maximum number of dots
for standard length.
3. If any part of an image is placed past maximum allowable dots
across the label, that part of the image will be lost.
4. If you attempt to print where there is no paper, you may damage
the print head.
5. For these commands, the leading zeroes do not have to be
entered. The command V1 is equivalent to V0001.
PN 9001055 Rev. E
SATO CX200 Printers